home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Tech Arsenal 1
/
Tech Arsenal (Arsenal Computer).ISO
/
tek-20
/
dr110mod.zip
/
DR110.MOD
< prev
Wrap
Text File
|
1991-07-07
|
1KB
|
21 lines
copied from packet:
From: "CARTY ELLIS (KA2Y)" <CELLIS@BROCKVMA>
Subject: ALINCO DR-110T MODS
To broadband the DR-110T, while holding the "F" and "VFO/M" keys down,
turn off the power and then turn it back on (still holding the keys).
The radio now has factory programming reset - you just lost your memories
but at least mine now transmits and receives from 130 Mhz to 169 Mhz.
Before you do this, remove the top cover - notice the long (2 inchish)
loop of yellow wire coming off the back of the front panel - clip it!
NOW - after resetting the microprocessor - press the "F" key, then
press the "Mhz" key (mine now says 370). press the "f" key again, then
press the "Mhz" key again - (mine now says 870!). Mine will scan from
870.000 to 889.995 Mhz. I selected a 15Khz step because the channel spacing
in this range is 30 Khz. Toggle the "F" and "Mhz" keys and you're back at
144 mhz. Enjoy.
--------------------------------------------------------------------------
Note: I haven't tried or verified this, proceed at your own risk. WA2ISE